MWC "Depthmaster" 100atm / 3,280ft / 1000m Water Resistant Military Divers Watch in Stainless Steel Case with GTLS and Helium Valve (Automatic) - Slight Paint Fault on Bezel
This watch is a 100AT/1224/SS/SL/A below is a full description of this particular watch and the issues which it has (or is reported to have because in many cases the watches do not have significant issues, below that is the full information relating to this model from the factory website which gives full details of all of the dimensions, specification and other information relating to the watch.
We buy these watches from various defence auctions and other disposal sales and it's frequently the case that we find that there is actually nothing wrong with the watch but it has to be assumed it will have some form of fault though in most cases it's very minor or as described below. These watches are disposed of at low-cost because we find that one of the problems is pressure of time for our service staff in the UK and elsewhere and in most cases they have given them a quick check over and nothing is immediately apparent though we have to assume that there is either no real fault with the watch or something will reveal itself over time in which case it’s normally a simple case of a service, repair or battery exchange depending on the exact model
Condition: Slight issue with bezel paint as can be seen in images
Fault: The watch is running fine other than the slight issue with the bezel paint it's perfect.
The MWC "Depthmaster" range Military Diver models are MWC's latest heavy-duty range and are both extremely robust with a sapphire crystal as well as being suitable for diving with mixed gases at extreme depths due to the 100atm water resistance rating, they also have a wider strap at 24mm (most military divers watches use a 20mm strap) and a non-scratch ceramic bezel which is easier to grip in extreme cold. This model also has tritium GTLS tubes for maximum nighttime and low light performance. The Depthmaster range is specifically designed for use by professional divers under challenging conditions.
All MWC 100ATM models are fitted with a helium escape valve, people often ask us how helium gets into a dive watch in the first place and the answer is very simple, essentially a helium molecule is among the smallest of all molecules. What this means is because they are so small even though the seals are working fine to keep water out the helium molecules can still get through and enter the watch even though other gases and water cannot.
The main users professionally of watches with helium escape valves are saturation divers who spend long periods of time at great depth with high pressure, the result is that the helium molecules can build up inside the watch creating pressure inside the case, this can inflict serious damage to the watch and even blow out the crystal or crown when it’s unscrewed, this is potentially extremely dangerous if for example you are just checking or resetting the time, it can also potentially write off the watch. What the helium escape valve does is automatically allow the helium molecules to escape from the watch during decompression when the watch returns to normal standard sea level pressure. The valve is only one way so it lets the helium out but prevents anything external from getting in.
For anyone who does not know why helium is an issue, it’s important to understand why helium is employed for deep diving. The reason is that helium is one of very few gasses that does not have negative effects such as we see with nitrogen which causes nitrogen narcosis, consequently helium is used to replace nitrogen in most deep-sea mixed gas diving applications.
In some situations, professional divers can operate at great depth for extended periods where they live in dry environments pressurized with an oxygen/helium mix. When the divers surface and decompress after days or even sometimes weeks this gas must be removed to prevent problems as mentioned earlier such as the crystal or crown being blown out which can potentially injure or even blind someone.
The reality is that most divers will not be living in a pressurized environment for days or weeks on end, this means they will have no need for a watch equipped with a helium valve, regardless of how deep they dive but with deep diver watches such as our 100ATM range, it's essential the valve is there just in case it’s needed because the watch would not be fit for purpose without it.
This particular variant has a 24-hour military format dial and is finished in stainless steel.
The movement is a high-quality 24 jewel automatic NH35A with a hacking function to enable synchronization. The movement also has a 41-hour power reserve.
Dimensions and Specification:
- Movement: 24 Jewel Automatic NH35A with hacking function
- Water Resistance: 100ATM / 3,280ft / 1000M
- Screwdown crown
- Helium Escape Valve
- Width: Inc Crown 47mm (Exc Crown 44mm)
- Bezel Type: Unidirectional Non-Reflective with Ceramic Insert
- Thickness: 18mm
- Crystal Diameter: 31mm
- Crystal Type: Sapphire with Anti Reflective Coating*
- Lug to Lug: 48mm
- Weight: 140g
- Case: 316L Stainless Steel
- Illumination: GTLS Tritium on markers and hands Luminova on the bezel
- Strap: 24mm NATO Webbing Strap
* A lot of people ask us what are the benefits of sapphire crystal over a standard mineral crystal? The answer is that synthetic sapphire is by far the best material for watch crystals because it is very strong and also shatter and scratch-resistant, these characteristics make it very appealing to military and security personnel, police officers and people who lead active outdoor lifestyles, these groups account for over 70% of our customers. To get things into perspective we find that when clients have accidents with watches resulting in a cracked crystal over 90% usually watches with mineral glass crystals, even factoring in that we use hardened mineral crystals they still do not come close to sapphire for durability under adverse conditions. The reason that sapphire crystals are so strong is that after the sapphire glass is manufactured it is also heat-treated to remove its internal stresses—which can cause weakness—it is then made into the watch crystals and two layers of anti-reflective coating are applied, interestingly sapphire crystal is now used on the latest iPhone. Of course, sapphire crystal comes at a price hence you find that it's normally only fitted to higher-end watches.